-
95% Regulation – It provides lower voltage drop from no load to full load.
-
Higher Efficiency – It is translated to lower heat and consequently energy saving.
-
Up to 15V multi-tap secondary on all wattage models.
-
Output voltages: 12/13/14/15 volts.
-
Transformer can be loaded up to the maximum rating on each tap and does not have to be de-rated.
-
Epoxy encapsulated transformer resulting in silent operation, and eliminating long term corrosion and rusting at the connections.
-
Auto-resetting in-line primary overload protection.
-
In-line secondary magnetic breaker(s) to protect against short circuit in the lighting system.
-
Extra-large terminal blocks for ease of installation, which will accommodate up to eight AWG #10 flexible wire.
-
Optional pluggable photocell and timer sockets, which allow you to add a timer and or a photocell at anytime.
-
Limited current timer receptacle accommodates all types of timers regardless of timer wattage capacity, therefore allowing the timer contacts to last longer.
-
Limited current photocell plug accommodates all types of photocells regardless of wattage capacity, thus enabling remote photocells to be run at long distances with a pair of small gauge wires.
-
Primary current loop allows measurement of the primary amperage under full load, which must be performed upon completion of installation.
-
Complies with article 411 of the National Electric Code.
-
UL approved 1838 transformer.
-
Made in the U.S.A