These lights are exactly what I needed, I am looking at ordering another set for a few more cabinets, just waiting to make sure I know where I'm going to put them.

These give a cool white, 6000 K or so light, very close to cool white F40 fluorescent bulbs. One strip is plenty of light for under a single cabinet. I'm using mine to light a display case. It's a great deal for the price.

Some technical details not in the description: The power supply is a wall-type, lightweight (no transformer) 120 VAC input supply with 12 VDC 1.0 A output, terminating in a standard DC connector (5.5 mm O.D., 2.1 mm I.D., center positive). This plugs into a cable that converts it to a 4-pin, 0.1 inch (2.54 mm) pitch connector (pins are +, -, -, +, so you can flip it over and it still works), which plugs into the LED strip.

The strip is flexible, contains 9 LEDs, and can be cut at the 1/3 or 2/3 points (though it would be hard to reuse the cut parts, since they lack connectors). Current-limiting resistors are built into the strip; just feed it 12 V at about 60 mA per strip and you're good to go.