The Nightscaping H30 Powercenters have all of the same features, placement, and options as the standard output Powercenters, but the H3O can deliver voltages in excess of 12-volts, reducing 120-volts to 11V-14V 60 cycles A.C. Designed with the professional lighting expert in mind, they are useful in situations where longer-than-average circuit distances and higher-than-average voltage demands are present. The H30 allows a lighting system to be engineered and installed without the costly installation of 120-volt power sources closer to the center of the low-voltage system.

Please note: Special care needs to be taken in maintaining a system that is powered by this multi-voltage output powercenter. No more than 10% of the lamps on a single run should remain inoperable at any time. If burned-out lamps are left unattended, additional lamp failure will be imminent. Special detailed notations should be made on design plans and as-built to mark the different voltage runs in case future additions or modifications are needed. This should prevent incorrect hi-voltage output being used when low voltage is adequate. Low voltage lamps should never operate at voltages any higher than 12-volts. In addition, all transformers from Nightscaping are magnetic.