MAL-312 - Large Aluminum 3-Circuit Transformer

By Focus Industries

Part #
3132831

Price
$535.00

Finish
Black Texture
Wattage
3 x 300w
Dimmer
None
Output Voltage
Standard 12.5v Output
Photocell
None
Timer
None

Dimensions
Width: 12" - Height: 16" - Length: 5"

Description
Heavy-duty Aluminum enclosure with hinged locking door. Rain tight enclosure, above grade (Nema 3R Type). Long life, high temperature (130° C) 266° F Class ‘B’ rated transformer. Isolation/insulation type. No contact between 120 volt and 12 volt windings. Copper shield. 1500 volt isolation between all windings and ground. 11 gauge cold rolled steel ‘L’ brackets for stable mounting. Grade M19 electrical grade steel for superior electrical and magnetic properties. Strip copper secondary windings for lower temperature rise. Single phase, open core and coil. El laminated windings (linear output) vacuumed impregnated with black slate flour. Filled varnish for superior heat dissipation and noise reduction. Class 180° C. 120 volt primary, 12.5 volt secondary 50/60 hertz/cycle standard. 6 ft (18/3) SJT-WA weatherproof grounded power cord (120 volt). On/off control via rocker switch. Extra heavy-duty (75A) terminal lug easily handles extra cable sets. Resettable magnetic circuit breaker for overload and short circuit protection. U.L. 1838 and 1598 Listed. All units are supplied with knock-outs for easy upgrading or adding of accessories. Optional Enhancements: Dimmer Module: Allows moderation of electrical output. Multi-Voltage Output Tap: Provides capability for output voltage of 12.5v, 13.5v, and 14.5v. Features a 75A extra heavy-duty terminal block. Holds up to 9 cable sets. Additional taps may be added to fixtures with multiple circuits. Photocell/Remote Photocell: Features dusk-to-dawn automatic control. Remote photocell comes with a 19’ cord and mounting hub. Integral Time Clock: Easily programmable integral time clock. 24 hr, 15minute increment settings. Timer-Ready: Timer ready receptacle for use with plug-in Intermatic timer or X-10 Module (plug-in timers and X-10 systems not supplied). Irrigation Controller Relay: Provides 24 volt AC relay control through an existing irrigation controller. Best used with irrigation controllers with 6-12 hour watering cycles. You must have an empty or available station and use a multi-program controller. Otherwise multiple start times will be needed for extended “Lights On” time. Use separate program for lighting vs. irrigation.