Stealth sensor with special 200º detection pattern for wide side-to-side coverage.

Bullet design with large glare shield for effective light control. Durable one piece die cast with rugged mounting arm, weatherproof gasket and drain holes. Accepts 150 watt PAR 38 max. Lamp not supplied.

• Rugged die cast aluminum housing with powder coat finish
• Lamp recessed 1" from lip for side glare reduction
• Larger diameter housing for easier relamping
• Set screw for hood, grill or visor attachment
• Heavy duty mouting arm with internal O-ring, locking teeth, and stainless steel screw
• EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver
• Large Silicone rubber gasket provides weatherproof protection around the lamp and socket

Die cast aluminum construction. Mounts to existing surface or recessed 4" boxes Adapter plate provided. Medium base socket and a variety of globes. Incandescent up to 150 watts.

• All brass hardware
• Close-up plugs allow Phillips or slotted screwdrivers for easy installation
• Junction box with sturdy mounting lugs
• UL Listed for use with 90° C supply wiring OK for use in dwellings and wet locations
• High temperature silicone internal gaskets
• Premium porcelain socket with 150° C 8" long leads
• Clear heat resistant glass globes standard Polycarbonate Permaglobes available
• Packed partially assembled for fast installation

Compact, tough and good looking cast aluminum housing with hinged framed glass lens. Integra Hood glare shield and stainless steel clip. 35 to 150 watt HPS Metal Halide Pulse Start. 50 & 70 watt with 120v reactor ballast or 100W with 277V NPF ballast. Lamp supplied.

• Easy Clip for tool-less relamping with Vandal Proof screw capability
• Integra Hood Glare Shield for Friendly Lighting when properly aimed
• Silicone gasket stays in place for durable weatherproofing & easy relamping
• Precision die cast aluminum housing with durable polyester powder coating
• Variable beam spread with 2 position adjustable socket
• Long life lamp included
• Mounting arm with sturdy locking teeth & internal gasket
• EZ Grip Locknut matches fixture finish and can be adjusted with fingers, pliers or screwdriver

A best buy in economical die cast floods.

Small cast aluminum housing for 13 and 26 watt or larger size housing for 32 and 42 compact fluorescent. Prismatic globe for low glare and even light distribution. Fixture mounts to junction box or can be wired inside the housing. Ceiling mounted with 1/2” (or 3/4”) side and top conduit feed. Lamp included.

• Weatherproof ballast box
• Die cast aluminum for superior durability
• All brass hardware
• Set screw keeps guard securely in place
• Clear heat resistant prismatic glass globes standard
• Polycarbonate Permaglobes and glass colored globes available for CFL only
• One piece die cast aluminum guards threaded for secure fit
• Close-up plugs allow Phillips or slotted screwdrivers for easy installation
• High temperature silicone internal gaskets
• Ballast housing mounts to any junction box

Super ceiling sensor wtih 360º view.

Compact, tough and good-looking housing with steel Trunnion or Slipfitter mount for easy surface mounting and aiming flexibility.

• Reflector designed for precise beam control
• Durable die cast aluminum housing and frame
• Stainless steel screws included
• Long life lamp included
• Supplied with 3' of STW cord
• Rugged Trunnion or Slipfitter mounting
• 2" Integra Hood to reduce light trespass and glare

15" round die cast aluminum housing with vandalproof refractor for optimum parking garage light distribution. 150 or 175 w vertical mount Metal Halide or 100,000 hour Induction Lamp supplied.

• Vertical lamp for better light disbursement and heat dissipation
• Both Vandal Proof Center Pin Torx and slotted Phillips head screws supplied
• Tough polycarbonate refractors and Die cast aluminum housings
• Philips QL induction system with 100,000 hours available. Consult factory
• Both Vandal Proof Center Pin Torx and slotted Phillips head screws supplied

Large die cast wallpack with tempered glass refractor.

Bullet design with large glare shield for effective light control. Hood with integral tempered glass lens reduces glare and protects lamp from water and impact damage. Durable one piece die cast with rugged mounting arm, weatherproof gasket and drain holes. Accepts 150 watt PAR 38 max. Lamp not supplied.

• Color may not match product image. Please refer to the specifications below for the correct color.
• Set screw for hood, grill, or visor attachment
• Heavy duty mounting arm with internal O-ring, locking teeth, and stainless steel screw
• EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver
• Rugged die cast aluminum ballast housings with powder coat finish
• Side and bottom conduit openings. Close up plugs supplied.

Medium size fluorescent ceiling mount fixture

• Both Vandal Proof Center Pin Torx and slotted Phillips head screws supplied
• Fixture works wtih 120, 208, 240 and 277 volts

Hallway version of the LOS2400 covers 16' x 80'.

This four tier landscape light features a rugged die cast aluminum housing that has a threaded, gasketed clear glass globe for durable weatherproofing and easy relamping. It is 1" long and includes a ½" threaded nipple for easy mounting.

This is a fixture only; stems are sold separately.