|
Description
|
Dimensions
Width: 12" Height: 16" Length: 5"
|
Voltage
120 volt
|
Listing
 , Made in the USA
|
Ship Weight
44lbs
|
|
- Heavy-duty Aluminum enclosure with hinged locking door.
- Rain tight enclosure, above grade (Nema 3R Type).
- Long life, high temperature (130° C) 266° F Class ‘B’ rated transformer.
- Isolation/insulation type. No contact between 120 volt and 12 volt windings. Copper shield.
- 1500 volt isolation between all windings and ground.
- 11 gauge cold rolled steel ‘L’ brackets for stable mounting.
- Grade M19 electrical grade steel for superior electrical and magnetic properties.
- Strip copper secondary windings for lower temperature rise.
- Single phase, open core and coil.
- El laminated windings (linear output) vacuumed impregnated with black slate flour. Filled varnish for superior heat dissipation and noise reduction. Class 180° C.
- 120 volt primary, 12.5 volt secondary 50/60 hertz/cycle standard.
- 6 ft (18/3) SJT-WA weatherproof grounded power cord (120 volt).
- On/off control via rocker switch. Extra heavy-duty (75A) terminal lug easily handles extra cable sets.
- Resettable magnetic circuit breaker for overload and short circuit protection.
- U.L. 1838 and 1598 Listed.
- All units are supplied with knock-outs for easy upgrading or adding of accessories.
Optional Enhancements:
- Dimmer Module: Allows moderation of electrical output.
- Multi-Voltage Output Tap: Provides capability for output voltage of 12.5v, 13.5v, and 14.5v. Features a 75A extra heavy-duty terminal block. Holds up to 9 cable sets. Additional taps may be added to fixtures with multiple circuits.
- Photocell/Remote Photocell: Features dusk-to-dawn automatic control. Remote photocell comes with a 19’ cord and mounting hub.
- Integral Time Clock: Easily programmable integral time clock. 24 hr, 15minute increment settings.
- Timer-Ready: Timer ready receptacle for use with plug-in Intermatic timer or X-10 Module (plug-in timers and X-10 systems not supplied).
- Irrigation Controller Relay: Provides 24 volt AC relay control through an existing irrigation controller. Best used with irrigation controllers with 6-12 hour watering cycles. You must have an empty or available station and use a multi-program controller. Otherwise multiple start times will be needed for extended “Lights On” time. Use separate program for lighting vs. irrigation.
|
|
Questions from other customers
|
|
|
|
Tags customers associate with this product
|
|
|
|
Additional Details
|
|
Product Id: MAL-412-1200
Group Id: 322930
Type Id: 1323
Sales Rank: 46
Load Time: 00.2652
|