Sale ends 4/2/17. Excludes select manufacturers.
Min. purchase $499.
A door knob may not sound like an important style item in your home, however, these often-overlooked details can sometimes make all the difference. The doors in my home came outfitted with polished brass knobs that looked like they'd already seen over a million hands over the years. They were worn, outdated, damaged, and the brass style really didn't help the overall look of our home. All of our kitchen appliances and bathroom accessories were satin nickel, and I had just ordered new satin nickel kitchen and bathroom faucets, so it was definitely time for the door knobs to change, too.
Now that I had my new knobs, all that was left to do was install them. Here's how:
Here is my pantry door knob in all of its bright, brassy, scratched, corroded, and dented glory. It may be hard to tell from the picture, but the knobs were an absolute mess.
If you have knobs with visible screws, this step is pretty simple. My knobs had no screws, so approaching this step was a little mystifying. After a few minutes of investigation, I realized that one of the knobs had a tiny button on the side, about the size of the head of a flat head screwdriver. I pushed a screwdriver in and pulled the knob toward myself. Pop. Off it came.
Next I had to remove the faceplate that covered the screw holes. I found a tiny notch on one of the sides (again, about the size of the head of a screwdriver) and pried the covering off pretty easily.
Now that the central components of the knob are exposed, you can take a screwdriver (this time a phillip's head) and remove the screws that hold the two sides together.
Once the screws are removed, the other side should fall off pretty easily. Depending on how old your knobs are, you may need to wiggle it a little to get the sticky pins inside free.
If the face of your latch has a faceplate, unscrew that first. As you can see above, mine did not have a facplate to remove. With your hands or a screwdriver, pop the interior latch out by applying some force toward the door edge. You should be able to pop it right out with minimal effort.
Take the new latch and put it in the door exactly as you removed the old one. Depending on how the new latch is assembled, you may need to add or remove the faceplate first.
My new door knobs were the visible screw type, so they required different installation than the old knobs. Note that at this point, you'll want to make sure you have the latch facing in the right direction. Unfortunately, I did not and installed it backwards. The flat side of the latch should be facing the direction that the door opens - This allows the door to shut without turning the knob and prevents it from opening when latched. Learn from my mistake!
Line both sides of your new knob together so that the screws match up. Screw them together tightly.
With a screwdriver, remove the old latch faceplate from the door frame. Now that you've got all of your old door knob elements removed, it's a good idea to save all the pieces in a zip-top bag in case you want to keep them, sell them, or donate them.
Your new door knob set will most likely come with several of these faceplates, so make sure you choose the style and shape that matches the notch in your door frame. If your door frame is a little off or the faceplate doesn't quite fit, a little sandpaper might do the trick.
So here we are - a new door knob, latch, and faceplate for the frame... all of which in a shiny satin nickel to match my stainless steel kitchen fixtures. For just over $20 and 5 minutes time, it really has made a big difference in my kitchen. I'm happy with the overall look, and I can't wait to see how they'll look next to my new kitchen sink faucet.