We mounted these on a short, 3" post above a wide column (entrance gate). Problem is that you cannot get to the screws on the bottom of the lamp base to tighten up the globe, so be careful! I had to solve the problem by drilling new holes through the side of the base to insert new clamping screws. It is not nearly as good, and I hope it works when we have a big wind! If this was mounted on a naked pole with at least 6" of clearance, there would not have been a problem. Also, the base is plastic and they just predrilled holes and stuck in metal tapping screws. The screws are very difficult to screw in and there is a danger that by holding the globe too tightly while trying to tighten the screws, you will crack it.
You currently have no recommended items. Browse a few more items to give us an idea of what you like.
Sign Up and Save 10%
Don't miss our design tips, savings and special offers! Join the ATGStores.com email list!
You are consenting to receive marketing emails from ATGStores.com. You can unsubscribe any time by using the unsubscribe link in our marketing emails, contacting us at ATG Stores, 11410 NE 122nd Way, Ste. 200, Kirkland WA 98034 or via email at Privacy@atgstores.com.